| Sizes: | 6' x 7' (1.8 x 2.1m) in apex style. (n.b. sizes quoted are nominal roof sizes.) |
| Double Doors: | Cream Metal Doors are set on 6' side. 67" high x 27". Padlockable with a ramp. |
| Ventilation: | Ventilated Gables. |
| Roofs: | Hot Dipped Galvanised Steel, colour cream. Translucent panels are available as an optional extra |
| Roof Beams: | Hot dipped galvanised steel. |
| Cladding: | Hop Dipped-galvanised steel. Green Walls. Cream roof and trimmings. |
| Framing: | Hot dipped galvanised steel. |
| Internal Height: | Metal Sheds - Superb Eaves height: 70" -- Ridge height: 76" |
| Double Doors: | Cream Metal Doors are set on 6' side. 67" high x 27". Padlockable with a ramp. |
| Assembly: | Simple to follow step by step assembly instructions come with every metal building, shed or workshop. |
| Base: | These metal buildings and workshops are supplied without a floor and it is essential that they are anchored to a solid concrete or slab base using rawl-plugs and screws through the pre-drilled holes in the metal building's base rail. Alternatively, we can supply a Hilti Screws and a drill kit or you can buy a Timber Floor Kit If you choose to fix to a timber deck base it is important that you ensure no water can come in the gaps in the decking. |
| Guarantee: | 12 year 'No-Rust-Perforation' guarantee |
| Optional Extras. | Window Kit. Corner Shelves. Timber Floor Kit. Hilti Screws and drill. Sky Light. Rear Wall Supports. |
| SPECIFICATIONS OF STEEL USED IN THE 'Grandale Six' METAL SHED RANGE |
| Pre Painted Galvanised Steel Sheet – Utilised for the wall, roof and doors of the storage unit |
|
| Thickness | 0.25mm | Base Metal Thickness (bmt) |
| Tensile | G550 | High Tensile |
| Coating | Z18 | 180 grams of Zinc Coating per m 2 |
| Paint Top Primer | 5 mic. | Epoxy Primer |
| Paint Top Coat | 18-20 mic. | Regular Modified Polyester |
| Paint Back Primer | 5 mic. | Epoxy Primer |
| Paint Back Top Coat | 10 mic. | Epoxy Light Grey |
|
| Galvanised Steel Sheet - Utilised for the frame of the storage unit |
|
| Thickness | 0.55 - 0.7 mm | Base Metal Thickness (bmt) |
| Tensile | G300 | Mild Steel |
| Coating | Z275 | 275 grams of Zinc Coating per m 2 |