WALLS
Sturdy 75mm x 38mm (70mm x 34mm finished) pressure treated framing which is diagonally braced and screwed together before being clad with your choice of:
• 19mm (15mm finished) pressure treated T&G Shiplap
• 22mm (20mm finished) pressure treated T&G Loglap
• 23mm – 6mm pressure treated Weatherboard with vapour proof barrier
FLOOR
19mm (15mm finished) pressure treated T&G on 47mm x 47mm pressure treated joists. Option to upgrade to 22mm (20mm finished) pressure treated T&G if required.
ROOF
A heavy duty green mineral polyester-based roofing felt atop 16mm (12mm finished) T&G match boarding with roof purlins and rafters supported as necessary on sturdy roof trusses and beams. The roof incorporates a unique soffit venting system which ensures good airflow within the roof space.
If desired we can fit apex models with decorative felt tiles, the unique Onduvilla roof tile system, classic Tapco slate effect tiles or beautiful warm cedar shingles.
HEIGHTS
There is a generous internal eaves height of 1.94m (6’ 4”) on Highclere and Kingsclere models, raising to an internal ridge height of:
• 1.8m (6’) apex = 2.16m (7’ 1”)
• 2.4m (8’) apex = 2.24m (7’ 4”)
• 3.0m (10’) apex = 2.24m (7’ 4”)
• 3.6m (12’) apex = 2.24m (7’ 4”)
All external roof heights (up to 3.6m span) comply with the 2.5m maximum height restriction imposed when erecting a building under Permitted Development.
DOORS
All doors are constructed using hemlock for the greatest stability and durability, set in a solid frame with a traditional drip-cill and hung on heavy butt hinges. There is a choice of chrome, brass or black door furniture and the doors are fully glazed allowing light to flood in.
WINDOWS
All models boast plenty of glass to allow light to flood inside your building. The default position – which we are always happy to vary without additional charge – will see a 1.2m (4’) wide double door to the centre of the long wall with a flanking window either side (where space permits) and one window to each side elevation. All windows are fixed although a top-hung opener can be added to any of these windows to increase internal air circulation if desired. There is a choice of different window styles:
• Contemporary – 1.5m (5’) high glazing to allow the maximum amount of light to flood into the building
• Classic – An alternative to Contemporary glazing; available in 1.2m (4’) and 0.9m (3’) variants
• Chalet – Similar to the Contemporary glazing but with the pane split into three to give a more traditional appearance
• Cottage – A modern-classic featuring a traditional split-sash style window and matching doors
• Georgian – Traditional 6 pane Georgian doors and windows offer a greater degree of privacy
ALL YEAR ROUND USE
If you are planning on using the building year round then we can fit double glazed units or even fully insulate your new summerhouse at the point of installation.
• Pressure treated floor, cladding and framing for long life
• Doors and windows configured to suit
• Optional lining and insulation
• Option to change from pressure treated to quality Redwood with full paint finish to exterior
• Free on-site installation in most areas
• Wide choice of roof coverings
All specifications are subject to change.
All sizes are nominal. E&OE.