Part of a collection of distinctive summerhouses for those who prefer something a little more unusual!
From the unique apex style Worthing and Littlehampton corner summerhouses, through the cabin style Eastbourne to the timeless Hailsham and Westbourne models, we have something in this collection which will delight everyone.
These buildings are some of the best available. So before choosing a new one for your garden you need to check out the specifications beforehand. In particular, the type of timber it is made from, whether any OSB board is used, and the general build quality. Check the competition out against the spec on our buildings.
WALLS
Sturdy 47mm x 47mm (45mm x 45mm finished) vertical framework clad with your choice of:
• 16mm (12mm finished) T&G Shiplap
• 19mm (15mm finished) T&G Loglap
FLOOR
16mm (12mm finished) T&G on 47mm x 47mm pressure treated floor joists with an option to upgrade to a heavy duty 18mm Caberboard floor. All buildings (exception Worthing and Littlehampton corner summerhouses) over 2.4m (8’) in both directions – e.g 2.4m x 2.4m (8’ x 8’) but not 2.7m x 2.1m (9’ x 7’) – are upgraded to 18mm Caberboard as standard as are all Hailsham and Westbourne models.
ROOF
16mm (12mm finished) T&G matchboard on sturdy roof purlins and covered with a heavy duty polyester based roofing felt. There is an option of cedar shingles or long-life felt tiles if you prefer something a little more decorative.
HEIGHTS
There is a generous internal eaves height of 1.82m (6’) on all models. The internal ridge heights are stated on the product descriptions below. All external roof heights – up to 3.6m (12’) gable – comply with the 2.5m maximum height restriction imposed when erecting a building under Permitted Development.
BUILDING STYLE
Worthing – A delightful corner building with a unique Apex style roof which is available in sizes from 1.8m x 1.8m (6’ x 6’) up to 3.0m x 3.0m (10’ x 10’). The front boasts a 1.2m (4’) wide pair of Georgian double doors and the side flanks a matching top-hung opening Georgian window. Internal ridge height on 1.8, 2.1m and 2.4m (6’, 7’ and 8’) models is 2.06cm (6’ 9”) and on 2.7m and 3.0m (9’ and 10’) models is 2.14m (7’)
FEATURES
• Unique designs
• Hand made to order
• Option for factory-applied paint finish
• Free on-site installation
• Safety glass
All specifications are subject to change.
All sizes are nominal. E&OE
