A charming range of versatile summerhouses which are hand-built by craftsmen using quality materials and traditional methods. There is a choice of five unique building styles; each of which is available with a traditional Apex style roof or a more contemporary Pent roof.
These twelve choices, coupled with an extensive options list, mean that these buildings will adapt perfectly to any garden however we are also able to add, remove or relocate windows to make a unique building that fits your needs perfectly.
These buildings are some of the best available. So before choosing a new one for your garden you need to check out the specifications beforehand. In particular, the type of timber it is made from, whether any OSB board is used, and the general build quality. Check the competition out against the spec on our buildings.
WALLS
Sturdy 47mm x 47mm (45mm x 45mm finished) vertical framework clad with your choice of:
• 16mm (12mm finished) T&G Shiplap
• 19mm (15mm finished) T&G Loglap
FLOOR
16mm (12mm finished) T&G on 47mm x 47mm pressure treated floor joists with an option to upgrade to a heavy duty 18mm Caberboard floor. All buildings over 2.4m (8’) in both directions – e.g 8’ x 8’ but not 9’ x 7’ – are upgraded to 18mm Caberboard as standard.
ROOF
Whether you opt for the traditional Apex or the more contemporary Pent roof style all buildings on this page feature a 0.38m (15”) roof canopy. If you wish to add a veranda then this can be added as an option in depths of 0.6m, 0.9m or 1.2m (2’, 3’ or 4’) and these optional verandas would include a decking floor, side rails and – in the case of the two larger sizes – wraparound front rails. The roof itself is constructed from 16mm (12mm finished) T&G matchboard on sturdy roof purlins and covered with a heavy duty polyester based roofing felt. There is an option of cedar shingles or long-life felt tiles if you prefer something a little more decorative.
HEIGHTS
There is a generous internal eaves height of 1.82m (6’) raising to an internal ridge height of:
• 2.1m (7’) and 2.4m (8’) gable – 2.06m (6’ 9”) • 2.7m (9’) up to 3.3m (11’) gable – 2.18m (7’ 2”)
• 3.6m (12’) gable and above – 2.36m (7’ 9”) • All pents – 2.06m (6’ 9”)
All external roof heights – up to 3.6m (12’) gable – comply with the 2.5m maximum height restriction imposed when erecting a building under Permitted Development.
BUILDING STYLE
Keymer – The contemporary style of this building sees a pair of fully glazed 1.2m (4’) wide double doors hung on black antique hinges with a fixed window either side. Each side flank boasts a top hung opening window set toward the front of each side flank with buildings of 2.4m (8’) or greater depth also boasting a second (fixed) window to each side.
FEATURES
• Roof canopy standard
• Optional verandas
• Option for factory-applied paint finish
• Free on-site installation
• Choice of Apex or Pent roof styles
All specifications are subject to change.
All sizes are nominal. E&OE
